Cooper Việt Nam

Cooper là một công ty toàn cầu có đại diện tại mọi châu lục và có danh tiếng quốc tế về sự xuất sắc trong thiết kế và sản xuất vòng bi chia đôi. Cooper Việt Nam

Tất cả các sản phẩm của chúng tôi đều được sản xuất tại Anh theo các thông số kỹ thuật cao nhất. Chứng nhận ISO 9001 của chúng tôi cho thấy bạn có thể tin tưởng vào cả sản phẩm và quy trình của chúng tôi, và gần đây chúng tôi đã được trao tặng Tiêu chuẩn môi trường ISO 14001 vì cam kết giảm thiểu tác động của chúng tôi đến môi trường.

Đại lý Việt Nam - Công Ty TNHH TM KT Hưng Gia Phát

Cooper Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Cooper HGP Viet Nam

100 Series
For certain bore sizes in the range 75mm to 150mm Cooper also offer the 100 Series. Lighter duty than the 01 series, it is more compact and capable of higher operating speeds.
01/01E Series
The most commonly used, 01 / 01E series are intended for medium duty applications with a wide range of speeds. 01E series are available in 45mm to 105mm size range, and 160mm to 300mm size range, and offer enhanced load carrying capabilities, and can be considered for applications where 02 series were previously considered.

Đại lý Cooper Việt Nam

02/02E Series
The 02 Series offers a more rugged bearing solution for demanding applications where the 01 Series may not be suitable. The 02 Series also operates over a wide range of speeds. For a given shaft size, the 02 Series offers more radial and axial capacity than the 01 Series.02E series are available in 160mm to 300mm size range, and with enhanced load carrying capabilities, they can be considered for applications where 03 series were previously considered.
03 Series
Designed for extreme loading conditions the 03 Series tops the capacity of the 02 Series and offers the highest load ratings of all standard series.
Flat Thrust
Flat thrust bearings can be placed either vertically or horizontally to take axial loads. They can also work in conjunction with other bearings (e.g.: radial) in one single arrangement. Cooper flat thrust bearings are used on gearboxes in power stations and cement works, air pre-heaters and coal pulverisers in power stations and water and sewage pumps and many other applications.

Đại lý Cooper Việt Nam

We can supply flat thrust bearings in custom-made designs and bore sizes from 60mm to 600mm to suit your individual application’s requirements. They are supplied un-mounted to be incorporated directly, but we can also create special housingsif required.
All Cooper flat thrust bearings are made to order.
04 Series
Cooper 04 Series bearings are specialized bearings for lighter duties at large bore sizes.
04 Series bearings are capable of high speeds, but are also used on lower speed applications. Use of these bearings at high speeds requires special attention to lubrication.
If the bearing is to be used at slow speeds only it may be possible to omit some of the ‘high speed’ features of the bearing, allowing a more economical bearing specification.
Generally, these bearing are available in expansion 'EX' and 'GR' types. Alternative configurations are possible where appropriate.

Cooper Việt Nam

These bearings may be subjected to a degree of adaptation to suit application requirements. They may also be supplied with slightly different bore sizes to those under which they are listed.
Full Row
For slow speed applications (up to approximately 10,000mm dn, depending on size and series) we can supply cageless bearings with a full complement of rollers. These have the same overall dimensions as standard GR and EX bearings, but have higher dynamic and static capacities. This may allow a lighter series of bearing to be selected (e.g. 01 Series instead of 02 Series) resulting in a more compact, and sometimes more economical, solution.
Over 600mm
Generally, these bearings are available in expansion 'EX' or fixed 'GR' types. Extra expansion 'Exilog' types are also made regularly, but often have different envelope dimensions (in particular, the inner race is usually wider).

Cooper Việt Nam

Lighter duty 04 Series bearings are shown separately.
It is always advisable to contact Cooper when specifying large bearings.
Water Cooled
Water-cooled bearing units for continuous casting machines are generally customised to individual applications. Bearings are of the 071 or 081 Series, which are designed specifically for this type of application. The general features of a typical design are illustrated above.
Bearings of the type illustrated may also be applied to other slow moving applications (generally under 15rpm) where a high capacity bearing is required in a compact envelope.
If you wish to specify Cooper water-cooled bearing units, or bearings of the 071 or 081 Series, please contact our technical department with details of the application.

Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Cooper Việt Nam / Hotline : 0938 906 663