Thermo Electric Việt Nam

Thermo Electric được thành lập vào năm 1941 để đáp ứng nhu cầu cấp thiết trên toàn thế giới về kỹ thuật sáng tạo trong lĩnh vực Đo nhiệt độ. Một nhóm đàn ông, do ông Fred S. Walter đứng đầu, được đào tạo trong lĩnh vực Kỹ thuật, Sản xuất, Thiết kế và Lắp đặt cảm biến nhiệt độ đã hình thành nên hạt nhân của công ty mới.Thermo Electric Việt Nam

Đầu những năm 1950, Thermo Electric bắt đầu mở rộng ra quốc tế bằng việc mở một nhà máy mới tại Ontario, Canada. Song song đó, nhóm kỹ sư TE đã mang đến nhiều giải pháp cảm biến được cấp bằng sáng chế mới, trở thành tiêu chuẩn cho những thách thức đo nhiệt độ khắt khe nhất của ngành công nghiệp trên toàn thế giới. Năm 1967, Thermo Electric đã đăng ký logo hoàn toàn mới của mình, trở thành biểu tượng của sự đổi mới, chất lượng và độ tin cậy cho các giải pháp đo nhiệt độ..

Đại lý Việt Nam - Công Ty TNHH TM KT Hưng Gia Phát

Thermo Electric Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Thermo Electric HGP Viet Nam

Thermocouples With Quick Disconnect Connector
Quick disconnect connector secured directly onto the end of the sheath allows for easy assembling and disassembling using a mating connector and extension
Calibration: J, T, K, E, N
Diameter: 1/25″ through 3/8″
Measuring Junction: Grounded, Ungrounded, Exposed Loop
Sheath Material: 300 Series Stn. Stl., Inconel 600
Termination: Bare ends, Quick disconnect connectors
tc-fiberglass-wires
Thermocouples With Fiberglass Lead Wire
Terminated to flexible fiberglass insulated lead wire or fiberglass with a stainless steel over braid with an epoxy filled transition allows for a direct run from the process to the control panel. The fiberglass insulation is unaffected by heat zones of up to 950° F. Over braid provides additional abrasion protection.

Đại lý Thermo Electric Việt Nam

Calibration: J, T, K, E, N
Diameter: 1/25″ through 3/8″
Measuring Junction: Grounded, Ungrounded, Exposed Loop
Sheath Material: 300 Series Stn. Stl., Inconel 600
Lead Wire: 20 gauge standard, fiberglass insulation or fiberglass with Stn. Stl. Over braid
Termination: Bare ends, Quick disconnect connectors
tc-pvc-leadwires
Thermocouples With PVC Lead Wire
Terminated to flexible PVC (220° F) or TEFLON (400° F) insulated lead wire, PVC insulation provides excellent resistance to moisture and petroleum products, TEFLON is unaffected by most corrosives, lubricants and outdoor weathering.
Calibration: J, T, K, E, N
Diameter: 1/25″ through 3/8″
Measuring Junction: Grounded, Ungrounded, Exposed Loop
Sheath Material: 300 Series Stn. Stl., Inconel 600
Lead Wire: 20 gauge standard, PVC or TEFLON insulation and jacketed

Đại lý Thermo Electric Việt Nam

Termination: Bare ends, Quick disconnect connectors
tc-armored-lead-wires
Thermocouples With Armored Lead Wire
Lead wire is available in fiberglass or PVC with a flexible stainless armor tubing overall. Armor is hex crimped to the transition and crimp boss or bracketed to connectors to resists extreme physical abuse. On bare ends six inches of lead wire extends past the armor for junction box connection.
Calibration: J, T, K, E, N
Diameter: 1/25″ through 3/8″
Measuring Junction: Grounded, Ungrounded, Exposed Loop
Sheath Material: 300 Series Stn. Stl., Inconel 600
Lead Wire: 20 gauge standard, fiberglass or PVC, flexible armor overall
Termination: Bare ends, Quick disconnect connectors
tc-plastic-melt

Thermo Electric Việt Nam

Plastic Melt Thermocouples
Plastic melt Bolt used in plastic extruders and injection molding machines. Connection allows insertion directly into the melt stream. The short immersion length prevents the tip from interfering with the process flow.
Calibration: J, T, K, E, N
Bolt Size: 1/2-20UNF, 3/8-24UNF(nozzle)
Bolt Length: 3″, 6″, 9″, 12″
Termination: Bare ends, Bend able Extension, Rigid Mount Connectors, Armored Lead wire
tc-accessories
Thermocouple Accessories
Complete supply of fitting accessories provides the means to mount any immersion thermocouple into a NPT threaded opening. Fittings can be adjusted once or readjusted using TEFLON or Lava ferrules. Adjustable Melt Bolt Thermocouple Adapter converts any 1/8″ diameter immersion thermocouple into a plastic melt bolt. Adjustable spring loaded adapter converts 1/16″ or 1/8″ diameter immersion thermocouple into a surface type bayonet.
Probes with Quick Disconnect Connector
Quick disconnect connector secured directly onto the end of the sheath allows for easy assembling and disassembling using a mating connector and extension.

Thermo Electric Việt Nam

Element Type: Platinum
Diameter: 1/8″, 3/16″, or 1/4″
TRC: .00385 ohms/ohm/°C
Resistance @ 0°C: 100 ohms @ 0°C
Sheath Material: 316 Stainless Steel
Termination: Quick disconnect connectors
rtd-lead-lengths
Probes with Lead Wire
Terminated to flexible fiberglass insulated or TEFLON® lead wire with an epoxy filled transition allows for a direct run from the process to the control panel. The fiberglass insulation is unaffected by heat zones of up to 950° F. TEFLON® provides additional corrosive protection up to 500° F.
Element Type: Platinum
Diameter: 1/8″, 3/16″, or 1/4″
TRC: .00385 ohms/ohm/°C
Resistance @ 0°C: 100 ohms @ 0°C
Sheath Material: 316 Stainless Steel
Termination: Quick disconnect connectors
rtd-armored-leads
Probes with Armored Lead Wire
Lead wire is available in fiberglass or TEFLON® with a flexible stainless armor tubing overall. Armor is hex crimped to the transition and crimp boss or bracketed to connectors to resists extreme physical abuse. Availabe with connector termination or bare ends with six inches of lead wire extending past the armor for junction box connection.
Element Type: Platinum
Diameter: 1/8″, 3/16″, or 1/4″
TRC: .00385 ohms/ohm/°C
Resistance @ 0°C: 100 ohms @ 0°C
Sheath Material: 316 Stainless Steel
Termination: Quick disconnect connectors
rtd-field-adjustable
Field Adjustable Probes
Field adjustable RTD’s recommended for application up to 500°F (260°C). A thin film bulb calibrated to ASTM standard to Class B or Class A accuracy with a temperature coefficient of 0.00385 offers both excellent resistance to vibration and

Cặp nhiệt điện Thermo Electric, Máy dò nhiệt điện trở Thermo Electric, Cảm biến wafer Thermo Electric, Máy phát Thermo Electric

Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Thermo Electric Việt Nam / Hotline : 0938 906 663